6 Error Message
6 - 13
Error Code Details Causes
49
Direction of tool tip in the lathe is not of the 0~9 type
Number of segment of axial displacement is greater than
10
Message
1. More than 6 nodes are lacking of axis displacement command from G41 or G42
(insert offset) to G40 (cancel offset) when applying the Tip Radius Offset function
(G41, G42).
2. The Tip orientation is the type other than 0~9 when applying the Tip Radius Offset
function (G41, G42).
Remedy :
Adjust the programming method or reset the Tip orientation.
Error Code Details Causes
50
.
.
99
Customer-defined error alarm using G65.
Remedy:
Check for any error in the setting of G65, customer-defined error message.
To Next Page
Loading...