HUST CNC H6D-T Manual
3 - 4
3.2 Positioning, G00
Functions and Purposes:
This command is accompanied with a coordinate name; it takes the current position as
the staring point and the coordinate indicated by the coordinate name as the end point,
which are positioned by the linear path.
Format:
G00 X(U)____ Z(W)____
X, Z : End point in absolute coordinates.
U, W : End point in incremental coordinates relative to the block starting
point.
Fig. 3-1 Fast positioning
Details:
Once this command is given, the G00 mode is kept effective until a G01, G02, G03,
or other single-time G command appears. Therefore if a subsequent command is
also G00, only the axis address needs to be specified.
The speed of positioning is set by a machine parameter.
This command is capable of controlling movements in 1-6 axes simultaneously.
No position movement will take place if the command gives no axis direction.
Example: Fig 3-2, A point moves to B point rapidly.
G0 X4.00 Z5.60 X and Z-axes are set with absolute commands
G0 U-6.00 W-3.05 X and Z-axes are set with incremental commands
Z
2
G00
X
Z
To Next Page
Loading...