HUSTLER 929125 - Chapter 9 Maintenance and Adjustments; Assembly and Routing Information

110907 01/09 9-3
Assembly Pictures and Aids
General Information for all models
Instrument panel (FIG. 1 & FIG. 2).
Wire harness and cable routings
Front of wire harness (FIG. 3). Route the 12" positive battery cable and the red wire through the cable boot prior to
fastening hardware to solenoid (FIG. 4).
FIG. 1 FIG. 2
FIG. 3 FIG. 4
PTO CLUTCH
SWITCH
TIE STRAPS
NEG. BATTERY CABLE
POS. BATTERY
CABLE
POS. BATTERY CABLE
FROM BATTERY
POS. BATTERY CABLE
TO STARTER
STARTER
SOLENOID