To Next Page
M
Ms. Stephanie SalinasJul 31, 2025
Why is the cutting height uneven on my HUSTLER Zeon?
- GGerald KingJul 31, 2025
Uneven cutting height in your HUSTLER Lawn Mower can occur if the blades are not sharp, so sharpen them. It can also happen if a cutting blade is bent, in which case you should install new cutting blades. Other potential causes include an unleveled deck (level the deck), an incorrectly set anti-scalp wheel (adjust the height), a dirty deck underside (clean it), or improperly inflated tires (adjust air pressure to 8 - 12 psi).
General
