Master Code
Auto Lock
Silent Mode
Wrong Code Entry Limit
Vacaon Mode
Factory Defaut
12345678
Disabled
Disabled
10 mes
Disabled
Factory Default Sengs
How To Reset
Safety Warnings
Troubleshoong（connued）
Troubleshoong
Protect your User Codes and Master Code.
Restrict access to your lock’s interior assembly and rounely check your
sengs to ensure they have not been altered without your knowledge.
Proper cleaning and maintenance of your lock ensures it will connue to
work as it should.
Do not apply cleaner or detergent directly to any part of the lock.
The HuTools meets IP54 water-resistance. It can withstand water
splashes ; however, do not let water and liquids get into the lock.
Avoid exposure to direct sunlight. Long-term exposure to direct sunlight
may damage the lock.
The temperature range of the HuTools is between -4°F to 131°F.
Keep the door opened and make sure the latch is retracted and
thumbturn vercal.
Step1
Press and hold the reset buon with one hand and the other
hand takes out one baery and places it back.
Step2
Do not release the reset buon aer baery is connected,
instead, keep holding it unl the latch automacally extends.
Step3
Problem:
(A)
b. Make sure you reset the lock with the door opened.
(A)
(
(
(
(
Problem
:
(A)
(A): The lock is not installed properly.
(
(
Problem
:
: The lock is not reset properly.
Problem
:
: a. Make sure the cable is properly connected.
: The lock has no power.
Problem
:
: a.
deep so the bolt fully extends.
the deadbolt strike or door frame.
Problem
:
: Make sure your door locks and unlocks smoothly. your
Problem
: The lock does not lock and unlock electronically.
1
4
2
6
7
Problem:
8
Problem:
: a.
9
10
Problem:
to factory default.
12
Problem:
11
Problem:
: a.
b. Do not insert the physical key before lock is completely install.
: The lock is not installed properly.
5
3
To Previous Page
Loading...
