2. Cautionary Notes
(1) Handle with care this instrument. Unexpected impact may result in damage to
the machine.
(2) Install this instrument on a level, stabilized table with no vibration to keep it
normal state.
(3) Do not install this instrument where it might be exposed to the direct sunlight or
too bright indoor light.
(4) To get accurate measurements, always keep it clean. Dust may result in
malfunction. After using this instrument, turn off power supply and keep the
dust cover over it.
(5) Contact your local distributor or agent if there is electronic beep sound when
you turn on the power. It might be mechanic problem.
5
To Next Page
Loading...
