8.2 Various Messages
Message box shows information when you are measuring or this instrument is out of
order.
Here is the description on messages that appear in measuring.
ALIGNMENT OK : When the optic center falls within 0.5 prism.
MARKING OK : When the optic center is correct.
OFF CENTER : When the optical center of lens is off too much.
Following messages are on out-of-working problem.
INITIAL ERR : when there is no image in the predefined position on
starting.
PP EMPTY : when there is no printing paper in the printer.
9. Power Saving Function
When the instrument is not used for mere than 5 minutes, power saving function works
63
To Next Page
Loading...
