Need help?Do you have a question about the Hydac HMG 4000 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Operating temperature | -20°C to +60°C |
| Protection class | IP 65 |
| Measurement channels | 4 |
| Measuring inputs | Analog and digital |
| Interfaces | USB, Ethernet |
| Input types | Voltage, current, frequency |
| Display | 3.5-inch color touchscreen |
Outlines safety aspects related to the device's operation and compliance.
Provides essential safety guidelines for proper and safe operation of the HMG 4000.
Identifies and describes all physical connection ports on the HMG 4000.
Guides the user on how to charge the device's battery.
Explains the procedure for powering the HMG 4000 on and off.
Details the gestures and methods for operating the touchscreen.
Guides through initial configuration steps like date, time, and language.
Explains how to view and interpret measured values from connected sensors.
Provides instructions on how to initiate a basic data recording.
Details how to view specific information for each measurement channel.
Explains the configuration and settings for analogue input channels.
Details the configuration and settings for digital input channels.
Covers the setup and operation of CAN bus and HCSI sensor connections.
Guides on how to initiate a new data recording session.
Details the different types of recording procedures available.
Explains how to monitor and manage recordings while they are in progress.
Guides on connecting and configuring SMART sensors to the HMG 4000.
Essential presets for CAN bus connection and configuration.
Details how to establish connections for CAN bus participants.
Configures node ID and baud rate for CANopen or J1939 devices.
Explains how to navigate, manage, and organize files on the device.
To Next Page