27
8 | Operating instructions
a Be sure you know the right points where to place the electrodes and ax
them there then, connect the electrodes to Digital Pain Relief with wire.
b Switch power on.
c After setting mode, intensity and time, you could feel stimulation at
electrodes and treatment starts. The time display is enabled and displays
the remaining time of application.
d Switch power o.
e Take electrodes o and clear them as shown in «User Manual»
Clean the electrodes.
• You should hold the plug when pulling it out. Please do not pull the wire.
• Please use clear water to wash or use wet cloth (instead of facial tissue) to
gently wipe up the electrodes when cleaning them.
• Do not use brush or ngernail to clean surface of the electrodes to avoid
scratching them.
8.1 | Usage diagrams
Waist Arm
Back Joints
Leg Adductors
Chest and
abdomen
Buttocks
To Next Page
Loading...