Hydra-Flex AQUA-LAB AX - Overview; Features; Specifications

© Hydra-Flex, Inc. 2017
OVERVIEW
Page | 1
FEATURES
• Consistentandaccuratechemicalapplication
• Flexiblepumpdesign—owratesFROM10to40GPM
• Compactdesignreducesfootprint
• Pre-wiredandpre-plumbedforfastinstallation
• EasyPlug-and-Playutilityandchemicalconnections
• Modulardesign—customizedtoyourneedsforupto15chemicalsplusTri-Foam
• UsesHydra-CannonChemicalManifoldSystemsforeasyandquickservice
• Color-codedChem-FlexInjectorsusingQuick-Changeconnections
• Fornewinstallationsorretrotinanycarwash
TheAQUA-LABwillsimplifythedeliveryofliquidchemicalstoyourcarwasharch.Itsplug-andplay
systemiscompactandpre-assembledforquickinstallation.
ToensurethattheAQUA-LABwillinterfaceproperlywithyourcarwashfacility,youmustrstverifythat
yourfacilityhasalloftheproperspaceandconnectionrequirementsaccordingtothespecications
below.YoumustalsoverifythatyouhaveorderedtheproperpartnumberforyourAQUA-LABtomatch
therequirementsneededbyyourfacility.
SPECIFICATIONS
• UPto15ChemicalPorts
• Upto15PneumaticPorts
• Hydraulicsoperatingpressure:200psi(Factoryset)
• Pneumaticsoperatingpressure:100psi(Factoryset)
• OperatingAmbientTemperature:40-120DegF
• Operatepumpswith208/230or480Voltages(3-phase)
• OperateSolenoidValveswith24VAC,24VDC,120VAC
• 1-1/2”watersupplyline(TXModel)
• 1”watersupplyline(AX&BXModels)
• Inletpressure:2-80psi
• SpaceRequirements:
 a.AquaLabSystems
 i.TXFModel–3’x3’footprintwith5’Clearance
  ii.TXWModel–2’widex4.5’highofwallspaceforsystem
  iii.AXModel–3’widex2’highofwallspaceforsystem
  iv.BXModel–1.5’widex2’highofwallspaceforsystem
 b.PumpAssemblies–Pumpsneedtobewithin3’ofthesystemtoallowconnectionofthe
  twowithjusttheincludedconnectionhose
  i.SinglePump–4’x1’wallspace
  ii.DualPumpWallmount–4’x3’ofwallspace
  iii.DualPumpFloorskid–4’widex1.5’deepfootprintwith4’ofClearance
 c.ElectricalEnclosures
  i.MotorStarter(AXandBXModels)–1’widex1.5’highofwallspace
  ii.VFDMotorController–1.5’widex2’highofwallspace
  iii.TerminalBox(Accessory)–1’widex1’highofwallspace