Do you have a question about the HYDRO-RAIN 04059 and is the answer not in the manual?
Lists the essential tools needed to install the irrigation controller.
Outlines the sequential process for mounting and connecting the controller.
Guides users through setting the clock, date, and initial start times.
Specifies the duration each individual station will water.
Configures how often watering occurs, using days, intervals, or odd/even settings.
Allows temporary suspension of watering cycles for a set duration.
Modifies watering duration by a percentage for seasonal adjustments.
Enables manual activation of specific stations or the entire system.
Runs all stations sequentially for testing after installation or service.
Details connecting and bypassing an external rain sensor for weather-responsive watering.
Information on operating pump start relays or master valves with the controller.
Instructions for replacing the controller's internal backup battery.
Contact details for technical support and information on product certifications.
Covers product warranty terms, conditions, and FCC compliance information.
| Cycle and Soak | Yes |
|---|---|
| Rain Sensor Input | Yes |
| Manual Watering | Yes |
| Backlit LCD Display | Yes |
| Power Source | Transformer |
| Indoor/Outdoor Use | Indoor |












Loading...