16 MAINTENANCE INFORMATION
preventative maintenance will add many hours to the life of your
pressure washer. Perform maintenance more often under severe
conditions. Do not spray high pressure water onto the machine.
Not all maintenance items apply to all machines.
MAINTENANCE SCHEDULE
Pump Oil Inspect Daily
Change After first 50 hours, then every 3-5 months or 500 hours
Axial pumps come filled with synthetic oil which does not require changing.
Burner Adjustment / Cleaning Annually
Remove Burner Soot Annually
Descale Coil Annually (more Often If Required)
Replace Spray Nozzle 6 months
Replace Quick Connects Annually
Clean Water Screen/Filter Weekly
Clean Float/Supply Tank Every 6 months
Replace HP Hose Annually
Belts Tighten 6 months (more often if required)
Check/Replace Annually
MAINTENANCE INFORMATION
DESCRIPTION OIL TYPE CAPACITY
Pump, General Non detergent SAE 30w 34-41oz
Pump, AR Non Detergent SAE 30w 10-41oz (axial pumps; no change req.)
Pump, Cat Cat Hydraulic, non-detergent 10w-40 ISO 68 11-25oz
PREVENTATIVE MAINTENANCE:
While your pressure washer has been produced with
quality materials and craftsmanship, you as the owner have
certain responsibilities for the correct care of the equipment.
Attention to regular preventative maintenance procedures will
assist in preserving the performance of your equipment. Contact
your Hydro Tek dealer for maintenance. A small investment in
Motor Clean Annually
To Previous Page
Loading...
Need help?
General
