Transporting the EXPLORER
®
The EXPLORER® can easily be transported.
NOTE: The propeller drive train should be fastened in the UP position for transporting.
In general, there are three ways to transport your EXPLORER
®
.
1. Trailer or Truck.
Set one fully assembled EXPLORER® on a trailer or in a truck and fasten securely.
2. On Top of a Car.
Set one fully assembled EXPLORER® onto a car-roof rack, and fasten securely. Make sure that
the car-roof rack is rated for the proper weight of the EXPLORER® and other miscellaneous gear.
3. Disassembled.
Disassemble the EXPLORER® and transport the individual sections.
Two EXPLORERS® can be transported in the same space required for one:
To Next Page
Loading...