INSTRUCTIONS
www.Hydrofarm.com
2
GETTING STARTED
Congratulaons on the purchase of your new APCEM2. Our products are packaged and shipped
with the utmost care. In the unlikely event that your item is incorrect, incomplete, or unsasfactory,
please contact us and we will see to xing it immediately. Feel free to contact us with any quesons,
comments, or concerns at Hydrofarm.com.
• To ensure safety, please read this manual carefully before installation and follow the instructions
herein.
• Store this manual in a secure place for future reference
WARNING: CHOKING HAZARD - Accessories contain small parts
PACKAGE CONTENTS
• CO
2
monitoring unit
• Micro USB Cable for power x2
• AC adapter
• User manual
• Rope strap; screws
FEATURES AT A GLANCE
• CO
2
/temperature/RH monitor
• Trend chart with variable time span
selections
• 2-Channel low drift NDIR sensor
• Built-In plant types directory
• 3 color LEDs for easy-reading
• Foolproof “Hold Home” function
OPERATING INSTRUCTIONS
Inial Setup: When rst unboxing, plug in the unit to the included Micro USB (or one of your own) to
almost any cell phone charger or USB power source. If successfully connected, 3 things will happen
while boong up:
• 3 LEDs flash one by one
• Chart display shows the current software version & “Warm Up”
• Main display shows a countdown from 10
Once the countdown is complete, your product is ready to use. No inial setup or calibraon is
needed.
DEPLOY THE STAND
PLUG IN THE USB POWER CABLE
OR HANG ON THE WALL
To Next Page
Loading...
Need help?
General
