Do you have a question about the HydroPoint WeatherTRAK ET Plus and is the answer not in the manual?
Provides an overview of the main controls and features of the WeatherTRAK ET Plus controller.
Details the functions available via the selector dial: Run, Setup, Schedule, Program, Copy.
Explains how to navigate and change settings on the WeatherTRAK ET Plus controller.
Details how to set the primary start time for irrigation cycles.
Defines a time frame during which irrigation is allowed to operate.
Configures a secondary start time for watering during high ET periods.
Covers setting the clock, time zone, and auto daylight savings.
Defines water day patterns for irrigation schedules.
Explains Fully Automated, User Program with ET, and User Program No ET modes.
Covers setting station parameters like mode, sprinkler type, soil, plant, and microclimate.
Covers setting station parameters for user-programmed modes like cycle time, soak time, and water days.
Guides on resolving water window, day interval, and communication alerts.
Troubleshoots no station output, landscape wet/dry, adjust feature, beeping, and blank/frozen displays.
Addresses ET display 'P' status, review screen differences, and '99+' minutes display.
| Model | WeatherTRAK ET Plus |
|---|---|
| Type | Smart Irrigation Controller |
| Connectivity | Cellular |
| Mobile App | Yes |
| Watering Adjustment | Automatic based on weather data |
| Remote Control | Yes |
| Flow Monitoring | Optional flow sensor |
| Compatibility | Compatible with various flow sensors and other irrigation system components |
| Remote Access | Yes, via mobile app or web portal |
Loading...