Why is my Hydropool Hot Tub water cloudy?
Cloudy water in your Hydropool Hot Tub can occur when microscopic particles are too small to be filtered out. To resolve this, test and adjust all water balance elements, and add a flocculent to combine the particles so they can be filtered. Also, increase the filter cycle time.
How to fix skin and eye irritation from my Hydropool HSC570G Hot Tub?
Skin and eye irritation in your Hydropool Hot Tub may be due to improper pH and/or total alkalinity levels. Test the water balance and make the appropriate adjustments to correct these levels.
What causes unstable pH in Hydropool HSC570G?
Unstable pH in your Hydropool Hot Tub is often caused by low total alkalinity levels. Test the total alkalinity levels and increase it with sodium bicarbonate if necessary.
What to do if my Hydropool HSC570G Hot Tub has discolored water?
Discolored water in your Hydropool Hot Tub can be caused by the presence of metals such as iron or copper in the water. Treat the water with a chelating or sequestering agent to resolve this.
Why does my Hydropool HSC570G Hot Tub have scale?
Scale in your Hydropool Hot Tub is often due to high calcium hardness. Test the calcium hardness level and treat with a sequesting agent or perform a partial drain and refill of the hot tub.
Why is the pH in my Hydropool HSC570G resistant to changing?
If the pH in your Hydropool Hot Tub is resistant to changing, it is likely due to high total alkalinity levels. Test the total alkalinity levels and decrease them with sodium bisulfate or muriatic acid if necessary.
What to do if my Hydropool HSC570G has excessive foam?
Excessive foam in your Hydropool Hot Tub can result from several factors: * Buildup of body oils or cosmetics: If there's no water line, use a defoamer to break up contaminants and a clarifier to filter them away. If a water line is present, drain and clean the spa. Clean the filter by soaking it overnight in bleach. An oil-absorbing sponge can help prevent future issues. Increase filter cycle time. * Laundry detergent residual in swimwear: Prevent this by running an extra rinse cycle on your washing machine or rinsing swimwear well by hand. * Excess organic contaminants: Use defoamer to break up contaminants, followed by a clarifier to filter them away, and thoroughly clean your filter. Draining and refilling the spa may be necessary if the foaming is excessive. * Low Calcium Ha...
To Next Page
General