Need help?Do you have a question about the Hydropool Hot Tub and is the answer not in the manual?
A message from the company expressing gratitude for the purchase.
Crucial safety guidelines and warnings for hot tub operation and user well-being.
Information on the dangers of prolonged exposure to high water temperatures.
Factors to consider when selecting an indoor location for your hot tub.
Factors to consider when selecting an outdoor location for your hot tub.
Detailed advice for indoor hot tub installations, including ventilation and drainage.
Detailed advice for outdoor hot tub installations, including permits and privacy.
Instructions for preparing a base for above-ground hot tub installations.
Instructions for preparing a base for full or partial in-ground hot tub installations.
Guidance on the support structure for the hot tub and cabinet.
Ensuring easy access to the hot tub's equipment for maintenance.
Guidelines for placing hot tub equipment remotely from the tub.
General guidance on installing the hot tub unit.
Application guide for Ground Fault Circuit Interrupters (GFCI) and Residual Current Devices (RCD).
Diagram illustrating typical GFCI installation for North America.
Diagram illustrating typical RCD installation for Europe.
Instructions for installing the hot tub pillows.
Instructions for installing the optional waterfall feature.
Instructions for fitting filter and ice-bucket covers.
How to operate the standard and LED mood lighting systems.
Instructions for securing the safety hardcover with locks.
Information on optional devices to assist with cover removal.
Procedures for priming the pump and releasing air locks.
Detailed steps for releasing an air lock from the pump.
Steps for powering up the hot tub for the first time.
How to check and adjust the hot tub's water temperature.
How to operate the pumps and jets, including automatic timeouts.
How to program the hot tub's filter cycles.
How to use the standby/drain assist for maintenance.
How the system protects against freezing temperatures.
Steps for initial start-up and priming the pump on the Gold Series control.
How to check and adjust the temperature on the Gold Series control.
Explanation of Standard, Economy, and Sleep modes for operation.
Steps for initial start-up and priming pumps on Platinum/Titanium controls.
How to check and adjust the temperature on Platinum/Titanium controls.
How to check and change the set temperature on these controls.
How to operate pumps and jets, including timeouts.
How to set the system clock time for the control panel.
Understanding LCD display functions and inversion.
How to lock and unlock the topside control panel.
Initial setup and temperature control for European systems.
How to operate pumps and their automatic timeouts.
Understanding clean-up cycles and programming filter cycles.
Using standby/drain assist and controlling mood lighting.
Initial setup and temperature adjustment for HPL203/205 systems.
Operating pumps and jets, understanding automatic timeouts.
Understanding clean-up cycles and setting the system clock time.
How to set the system clock time on these controls.
Understanding and programming filter cycles.
Operation of purge cycles and changing hot tub modes.
Initial setup and temperature adjustment for MSPA-MP systems.
How to operate pumps and jets, including starting P2/P3.
Overview of the system programming steps for MSPA-MP.
How to set filter cycle start times and durations.
Operation of purge cycles and changing hot tub modes.
Procedures for locking and unlocking the control panel.
Using standby/drain assist for maintenance tasks.
Operating mood lighting and the optional blower.
Initial setup and priming the pumps for HPL303 systems.
How to check and adjust the temperature on HPL303 controls.
How to check and change the set temperature on HPL303 controls.
Operating pumps and understanding filter cycles.
How to set the system clock time for the control panel.
How to adjust the water flow for specific hydrotherapy jets.
How to adjust the air flow for specific hydrotherapy jets.
Guide to swapping different jet inserts for custom hydrotherapy.
Steps for removing and reinstalling jet inserts.
How to use the diverter valve to direct water flow.
How to operate the waterfall flow control valve.
Overview of the Spacoustic™ audio system's features and Clarion components.
Standards defining true marine audio systems.
Details on the AM/FM CD player and spa-side remote control.
Instructions for operating the audio system and winterizing it.
Explains why maintaining water quality is crucial for equipment longevity.
Lists factors influencing water balance and maintenance needs.
Definitions of common terms used in hot tub water maintenance.
A chart detailing ideal ranges for water balance parameters.
Information on the technology used for ozone generation.
Steps for treating the water during the initial fill of the hot tub.
Daily tasks for maintaining hot tub water quality.
Weekly tasks for maintaining hot tub water quality.
How to remove, clean, and replace the cartridge filter.
Procedures for draining and refilling the hot tub water.
Step-by-step guide to draining the hot tub water.
How to clean and polish the hot tub's acrylic surface.
Details about the safety hard cover and its maintenance.
Instructions for properly winterizing the hot tub to prevent freeze damage.
Meanings of display messages related to overheating.
Meanings of display messages related to sensor or communication issues.
Meanings of display messages related to water flow and pressure.
Meanings of display messages for heater status, standby, and modes.
Troubleshooting common electrical and mechanical problems with the hot tub.
Solutions for cloudy water, blue water, foaming, and skin irritation.
Troubleshooting power issues and cold weather concerns.
To Next Page
General