H Y D R O P O O L I N D U S T R I E S
13
PILLOWS
TUBULAR
The tubular pillows are a friction fit. Simply compress the ends slightly, and slide into the semi-circular recess above the
seat or lounger, with the Hydropool logo facing out.
Although the pillows are designed to remain in-place in the hot tub, to extend the life of the pillows, remove after each use.
INSTALLING ACCESSORIES
When unpacking your new Hydropool hot tub, you will find an accessories bag inside containing
• pillows (except for model H600)
• filter and ice-bucket covers
• coloured light lenses (not required for units ordered with optional L.E.D. lighting)
• tool for opening the wall fitting to access the light bulb (not required for units ordered with optional fiber-optic lighting)
• #10 expansion plug
• keys for equipment access door (for units ordered with the cabinet)
• hose bib adapter (Europe only)
WATERFALL
If you received the optional waterfall package, remove the blade from the waterfall receiver fitting in the hot tub (already
installed at the factory). Insert the waterfall blade through the front of the special waterfall pillow. The front flange of
the waterfall blade will be recessed into the front of the pillow. If it is not recessed, the blade needs to be removed and
re-inserted through the opposite side of the pillow. Push the pillow into the semi-circular recess, ensuring that the portion
of the blade protruding out of the back of the pillow inserts firmly into the waterfall receiver fitting.
To Next Page
Loading...
