The system data label is located on the control box.
This label is very important and contains information
you will need to establish your electrical service. The
voltage and amperage ratings are shown on the
bottom of the label. Product, Model, Serial and Code
numbers are also shown on the label.
REFER TO NEC FOR
BREAKER SIZING
ORDER
CODE: CSXXXX
MODEL: XXXXXXX-XXXXXXX
CODE: XXXX-XXXX-XXX
VOLTS: 120 240
AMPS: SEE RATINGS LABEL
PRODUCT: HQXXXX
SYSTEM DATA INFORMATION
16
Corona, CA 92880 | www.hydroquip.com
To Next Page
Loading...
