<Note!>
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
▶ CAUTION
1. To reduce the risk of fire, use only No. 26 AWG OR LARGER
Telecommunication cord
2. Risk of explosion if battery is replaced by an incorrect type.
Dispose used batteries according to the instructions.
3. For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
4. The equipment is to be secured to the building structure before
operation.
5. A security container shall be permitted to optionally be provided with a
secondary lock, but improper use of the secondary lock feature will
reduce the security level of the ATM.
Description of precaution symbols
Electrical Shock Warning
▪ Do not remove cover. Only a maintenance engineer is
allowed to open the cover.
▪ Do not touch. You may receive electric shock.
▪ Make sure to turn off the power when servicing the
equipment.
Use Precaution when Moving
▪ The equipment is heavy. Make sure at least 2 people lift or
move the equipment.
▪ Do not attempt to move the equipment alone. You may be
injured from dropping the heavy equipment.
To Next Page
Loading...
