Model: GV650
Reference Description
Part name Qty Spec.
At first, disassemble PILLION Rider R & L.
BACK REST 1 -
1. Assemble PILLIONS and BACK REST BOLT 2 M8*15mm
using M8*15mm BOLT to ⓐ point.
In case PILLION has no tapping hole,
please make 8mm tapping hole.
Then assemble the two parts to Frame.
CARRIER 1 -
Assemble CARRIER with BACK REST. BOLT 4 M6*15mm
S/WASHER 4 6mm
How to assemble BACK REST & CARRIER
Required parts
Need help?
General
