Need help?Do you have a question about the HYOSUNG ST7 and is the answer not in the manual?
General| Engine Type | V-Twin, 4-stroke |
|---|---|
| Transmission | 5-speed |
| Fuel System | Fuel injection |
| Ignition | Digital |
| Front Suspension | Telescopic fork |
| Rear Suspension | Dual shock absorbers |
| Front Brakes | Dual disc |
| Rear Brakes | Single disc |
| Front Tire | 120/80-16 |
Procedure for initial charging of the battery for improved durability.
Instructions for installing the battery after initial charging.
Guidelines for proper break-in to ensure maximum life and performance.
Explanation of special meanings for warning, caution, and note signals.
Precautions for ensuring rider and passenger safety during motorcycle riding.
Safety tips and guidelines for selecting and installing accessories.
Hazards associated with modifying the motorcycle or removing original equipment.
Recommended unleaded gasoline octane rating and refueling precautions.
Guidance on engine oil quality, grade, and viscosity selection.
Information on compatible engine coolant and distilled water mixture ratios.
Explanation of the ignition switch positions and their functions.
Instructions for locking the steering and using the ignition key.
Description of the instrument panel indicators and their meanings.
Information on the fuel meter and odometer functions.
Procedure for adjusting the motorcycle's clock display.
Functions of the select and reset switches for various displays and modes.
Speedometer function and the FI check lamp indicator.
Controls located on the left handlebar, including clutch and turn signals.
Controls located on the right handlebar, including engine stop and throttle.
Instructions for adjusting the front brake lever and operation of the rear brake pedal.
How to properly operate the 5-speed gearshift lever.
Adjusting the position of the footrests for riding comfort.
Adjusting gearshift link rod and side stand interlock system.
Procedures for seat locking and adjusting rear shock absorber.
How to use the helmet holder for temporary storage.
Instructions and precautions for refueling the fuel tank.
How to check engine oil level and procedure for oil and filter change.
Checking coolant level and procedures for changing coolant.
Necessary steps and precautions before starting the engine.
How to start moving and shift gears smoothly.
Techniques for riding on hills and proper stopping and parking procedures.
Maximum throttle opening and speed variation during break-in.
Proper break-in for new tires and importance of the 1,000 km service.
Essential checks before operating the motorcycle for safety.
Detailed checks for steering, throttle, clutch, brakes, suspension, and fuel.
Chart indicating intervals for periodic service in kilometers.
Identification of major lubrication points for smooth operation.
Specific maintenance tasks for engine components like air cleaner and spark plug.
Maintenance tasks for chassis components like drive belt and brakes.
List of items included in the provided tool kit.
Inspection of engine coolant, radiator, rubber caps, and exhaust pipe.
Checking front/rear suspensions, mirrors, and reflectors.
Checking battery solution level and cleaning terminals.
Procedures for cleaning and maintaining the air cleaner element.
Steps for removing, cleaning, and checking spark plugs.
Spark plug gap, tightening torque, and replacement guide.
Adjusting the play in the twin throttle cable system.
Adjusting the clutch cable play for proper disengagement.
Checking drive belt condition and adjusting slack.
Precautions for drive belt bending and replacement.
Checking brake fluid level in the master cylinder.
Inspecting and replacing worn brake pads.
Checking brake disks, hoses, and fluid leakage.
Inspecting tire pressure, thread depth, and wear indicators.
Checking tires for cracks, cuts, and abnormal wear patterns.
Procedures for replacing front and rear tires.
Checking and replacing vehicle bulbs, ensuring correct capacity.
Steps for replacing headlamp and turn signal bulbs.
Procedures for replacing brake, tail, and license plate bulbs.
Checking fuses when the engine or electrical systems fail.
Inspection steps when the engine refuses to start.
Troubleshooting common causes of engine stalling.
Procedures for transporting the motorcycle and draining the fuel tank.
Guidelines for washing and cleaning the motorcycle after rides.
Guidelines for storing the motorcycle for long periods.
Steps to follow when preparing a stored motorcycle for riding.
Physical dimensions and weight specifications of the motorcycle.
Details on engine type, bore, stroke, and displacement.
Information on clutch, final reduction ratio, and gear ratios.
Specifications for suspension, steering, brakes, and tires.
Details on ignition, battery, fuses, and lamps.
Fuel tank and engine oil capacities.
To Next Page