EasyManua.ls Logo

HYPERICE HYPERVOLT - Product Specifications; Usage Instructions; Charging; Operating

HYPERICE HYPERVOLT
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
CHARGING
Fully charge battery for up to six hours before irst use either attached or detached from the device.
To charge, connect the DC end of the supplied 24V adapter to the battery’s charging port and plug AC side cable
into wall outlet.
LED band on battery lights pulsate to show battery level and indicate active charging.
With battery attached, LED lights on unit lash to show battery level and indicate active charging.
Full charge is indicated when all LED lights stop lashing and remain fully illuminated.
Battery may be recharged at any time and at any battery level.
It is not recommended to fully deplete the battery to the red LED level.
The average run-time is 2+ hours depending on speed level and pressure applied during use.
OPERATING
Align and attach battery into base of unit – ensure it is securely locked in place.
Power device on by moving the power switch on the bottom of the battery to the ON position. Power device o by
moving the power switch to the OFF position.
With power switch in ON position, press the power button once to turn device on to level one, twice to turn device
to level two and three times for level three. Pressing the power button again will turn the device o. The blue LED
lights will indicate the corresponding power level.
With unit o, fully insert applicator by pressing in. Remove by pulling it out.
Massage desired body part at the desired speed applying pressure as needed.
To remove the battery, lightly press the battery release button with thumb. Firmly pull downwards on the battery /
handle with the other hand.
MAINTENANCE, CLEANING & STORAGE
Use a slightly damp towel to clean device and a dry with a soft cloth.
For storage or travel, remove battery and store in supplied carton box.
1 Powerful Brushless High-Torque Motor
with Quiet Glide
Technology
2 Removable Battery Release
3 Rechargeable Lithium-Ion Battery
(2+ Hrs of Use Per Charge)
*Additional batteries available at hyperice.com
4 3 Speed Settings for Optimal Pressure
5 Cordless and Lightweight (2.5 Lbs)
*Includes AC wall charger
6 ON / OFF Power Switch
7 Interchangeable Applicators (x4)
Vibration Frequency:
Level 1 – 30Hz, Level 2 – 40Hz, Level 3 – 53Hz
Weight:
2.5 lbs / 1.1 kg
Charge:
110-240V 50/60Hz – .5A – 24VDC-1A
USAGE INSTRUCTIONS
PLEASE READ PRIOR TO USE
1
3
4
5
7
Side View Back View
6
2
Fork Bullet Flat Round

Other manuals for HYPERICE HYPERVOLT

Related product manuals