HYPERICE Normatec 2.0 - Operating the Normatec 2.0 System; System Setup Instructions

7
Normatec 2.0 Arm Attachment (single-person use only)
1. Attachment connector
2. Zones
Normatec 2.0 Hip Attachment (single-person use only)
1. Attachment connectors
2. Zones
Normatec 2.0 Power Supply
1. Wall outlet plug
2. Barrel connector
OPERATING INSTRUCTIONS
WARNING! BEFORE OPERATING THIS CONTROL UNIT: Read all warnings at the beginning of this manual. If you do
not understand these operating instructions, contact Hyperice at +1.949.565.4994.
SET UP THE SYSTEM
• Step 1: Plug the power supply into an electrical outlet and then into the Normatec 2.0 control unit.
This control unit is equipped with a lithium ion battery. The battery automatically charges when the power supply
is connected to the Normatec 2.0 control unit and an electrical outlet.
1
2
2 2 2 2
11
2
2
2
2
2
1