Why HYPERICE Personal Care Products shows Low Battery?
If your HYPERICE Personal Care Products displays a 'Low Battery' message, it simply means the battery needs to be charged. Plug in the control unit to charge the battery.
What to do if my HYPERICE Normatec 3 system does not start?
If your HYPERICE Personal Care Products system isn't starting, first, ensure the power is on by pressing the power button. Then, verify the charger is securely connected to both the control unit and a working electrical outlet. A faulty wall outlet or loose connection can prevent the system from starting.
Why my HYPERICE Normatec 3 Personal Care Products attachments (leg, arm, or hip) do not inflate?
If the attachments on your HYPERICE Personal Care Products system aren't inflating, it could be due to a few reasons. First, make sure you've started the session by tapping the start button. Also, check that the hose is securely connected to both the control unit and the junction box. Finally, inspect the attachments and hose for any signs of damage or air leaks.
What to do if HYPERICE Normatec 3 Personal Care Products system stopped pumping?
If your HYPERICE Personal Care Products system suddenly stops pumping, check that the hose is securely connected to both the control unit and the junction box. Also, inspect the attachments for any damage that may cause an air leak.
How to fix ERR Air leak message on HYPERICE Personal Care Products?
To address the 'ERR' air leak message on your HYPERICE Personal Care Products, inspect the hose and attachment for leaks. Ensure all connectors are firmly attached. If using only one attachment, verify the blocking plug is fully seated in the junction box.
Why won't my HYPERICE Personal Care Products system start?
If your HYPERICE Personal Care Products system isn't starting, there are a few potential reasons. First, ensure the power is turned on by pressing the power button. Next, verify that the battery is charged or that the charger is securely connected to both the control unit and the electrical outlet. Finally, check that the wall outlet itself is working correctly.
What to do if HYPERICE Normatec 3 Personal Care Products attachments do not inflate?
If the attachments aren't inflating, first ensure the session has been started by tapping the start button. Also, check that the hose is securely connected to both the control unit and the junction box. Finally, inspect the attachments and hose for any signs of damage that might cause an air leak.
Why did my HYPERICE Normatec 3 Personal Care Products system stop pumping?
If your system suddenly stopped pumping, the issue might be related to the hose or the attachments. First, check that the hose is securely connected to the control unit and that the attachments are securely connected to the junction box. Then, inspect the attachments for any air leaks.
How to fix the 'ERR' air leak message on HYPERICE Normatec 3 Personal Care Products?
To resolve the 'ERR' air leak message, inspect the hose and attachment for any leaks. Ensure all connectors are firmly connected. If you're using only one attachment, verify that the blocking plug is fully seated in the junction box.
What to do if HYPERICE Normatec 3 shows a low battery?
If your device indicates a low battery, simply plug in the control unit to charge the battery.
Covers critical warnings and cautions to prevent electric shock, fire, injury, and property damage during device use.
Guidance on consulting a physician before use for specific health conditions or concerns.
Details protection against electric shock, including Class II and Type BF classifications.
Specifies the degree of protection against water ingress and solid objects.
Information on the equipment's suitability for use with flammable anesthetic mixtures.
Indicates that the equipment is designed for continuous operation.
Addresses potential causes and solutions when the system fails to power on.
Provides troubleshooting steps for when attachments fail to inflate or start.
Offers solutions for issues where the system ceases pumping during operation.
Guides users on resolving 'ERR' messages related to air leaks in the system.
Solutions for low battery conditions and charging the device.
Troubleshooting steps for establishing and maintaining Bluetooth connectivity.
Identifies the components and buttons of the Normatec 3 control unit.
Illustrates the parts and connections of the Normatec 3 hose.
Shows the zones and connector for the Normatec 3 leg attachment.
Details the zones and connector for the Normatec 3 arm attachment.
Step-by-step instructions for connecting the charger, hose, and attachments.
How to select the correct attachment type (Legs, Hips, Arms) for treatment.
Instructions on how to adjust the massage pressure level during a session.
Guidance on using the ZoneBoost feature for increased intensity in specific zones.
How to set or adjust the duration of the massage session.
How to initiate the massage session using the Start/Stop button.
Instructions for pausing, resuming, or stopping the massage session.
Steps to properly conclude and disconnect the massage session.
Procedure for safely powering down the Normatec 3 control unit.
Guide to downloading and connecting the system to the Hyperice App via Bluetooth.
Advice on configuring the app and OS for secure, up-to-date operation.
Instructions for cleaning the control unit and attachments.
Information on routine maintenance requirements for the system components.
Guidance on proper storage locations and conditions for the system.
Information on how to obtain replacement parts and accessories.
Details on the Bluetooth 5.0 technology, specifications, and potential interference.
Information regarding compliance with FCC and Industry Canada regulations.
Compliance with FCC/ISED radiation exposure limits for uncontrolled environments.
Special precautions required for electromagnetic compatibility (EMC) of medical equipment.
Information on the equipment's RF emissions and suitability for various environments.
Details on the system's immunity to various electromagnetic disturbances.
Details about the rechargeable lithium-ion battery, usage, and charging.
Specifications for the Normatec 3 model, including dimensions and weight.
Specifies electrical requirements, pressure, temperature, and humidity limits.
Details about the specific AC-DC adapter required for the system.
Details the one-year limited warranty against manufacturing defects.
Outlines the conditions and procedure for returning the equipment within 30 days.
Information on reporting serious reactions or product quality issues to the FDA.
Methods for submitting voluntary adverse event reports to the FDA.
Specific safety precautions and usage guidelines for users in Mexico.
General| Compression Levels | 7 |
|---|---|
| ZoneBoost | Yes |
| Bluetooth Connectivity | Yes |
| Zones | 5 |
| Customizable Settings | Yes |
| App Integration | Yes |
| Category | Personal Care Products |
| Compatibility | iOS and Android |
| Warranty | 1 year |
| Device Type | Compression therapy system |
| Product Name | Normatec 3 |
| Type | Compression therapy system |
| Material | Nylon |
| Battery Life | Up to 3 hours |
To Next Page
