Hyster C299 - Page 10

9.
Remove the parking brake cables. Refer to the
section
Brake System 1800SRM1247 for lift truck mod-
els
• H6.0FT, H7.0FT (H135FT, H155FT)
(H006, J006, K006)
.
Brake System 1800SRM1247 for lift truck mod-
els
• H8.0FT, H8.0FT9, H9.0FT (H170FT,
H175FT36, H190FT) (A299, B299)
.
Wet Brake System 1800SRM1977 for lift truck
models
• H6.0FT, H7.0FT (H135FT, H155FT)
(L006)
.
Wet Brake System 1800SRM1977 for lift truck
models
• H8.0FT, H8.0FT9, H9.0FT (H170FT,
H175FT36, H190FT) (C299)
.
10.
Disconnect the brake supply line from the
brake line cross fitting on the drive axle. See
Figure 3.
11.
Disconnect the accumulator/brake booster sup-
ply line from the manifold on the drive axle.
See Figure 3.
12.
Disconnect the brake booster return line from
the manifold on the drive axle. See Figure 3.
NOTE: Note placement of hose clamps prior to re-
moval of hoses to aid in installation.
13.
Disconnect the drive axle to transmission cool-
ing return hose from the manifold on the drive
axle. See Figure 3.
14.
Disconnect the transmission to drive axle cool-
ing supply hose from the manifold on the drive
axle. See Figure 3.
Drive Axle Removal 1400 SRM 1344
4