This document is a service and repair manual for Hyster E004 (S70XM, S80XM, S100XM, S120XM, S120X MS) and F004 (S3.50-5.50XM) forklift models. It primarily contains electrical, hydraulic, and transmission diagrams, along with safety precautions for maintenance and repair.

Function Description:

This manual serves as a comprehensive guide for technicians performing service and repair operations on the specified Hyster forklift models. It provides detailed diagrams and schematics that illustrate the electrical, hydraulic, and transmission systems, enabling accurate troubleshooting, repair, and maintenance. The inclusion of safety precautions emphasizes the importance of safe working practices during all procedures. The manual is structured to assist in identifying components, understanding system layouts, and performing repairs according to manufacturer specifications.

Important Technical Specifications (Derived from diagrams and model names):

Models Covered: Hyster E004 (S70XM, S80XM, S100XM, S120XM, S120X MS) and F004 (S3.50-5.50XM) forklifts. The "S" prefix likely refers to pneumatic tire trucks, and the numbers (70, 80, 100, 120) could indicate lifting capacity in hundreds of pounds (e.g., 7,000 lbs, 8,000 lbs, etc.) for the XM series, or in metric tons (3.50-5.50) for the S3.50-5.50XM.
Engine Types: The manual includes schematics for Liquid Petroleum Gas (LPG), Gasoline (Gas), GM V-6 Gas and LPG, and Diesel engine configurations, indicating that these forklifts are available with various internal combustion engine options.
Transmission: Diagrams for a "Single-Speed Powershift Transmission" are included, suggesting this is a standard transmission option for these models.
Electrical System: Features detailed electrical schematics covering lighting, starter relays, horn, ignition, alternator, accessory connections, brake lights, park brake, inching brake, transmission neutral switch, lever directional control, pedal directional control, work lights (LHF, RHF, rear), turn signals, tail lights, brake lights, reverse lights, reverse alarm, and various sensors and indicators (MAP sensor, coolant temp, oil pressure, low LP indicator, battery voltage, fuel level, water temp, air filter restriction, brake fluid level, service engine, HST overspeed, glow plug, water in fuel, XMSN oil temp, XMSN 1st gear, HST fault, alternator charge, seat belt light, timer). The presence of a "Power Distribution Module" (PDM) indicates a centralized electrical control system.
Hydraulic System: A "Hydraulic System Schematic" is listed, implying detailed information on the hydraulic circuits, including components like pumps, valves, cylinders, and reservoirs, although the specific diagram content is not visible in the provided snippets.
Control Systems: The forklifts feature a "Governor Controller" for engine management, and various control switches for directional movement (forward/reverse), neutral, and brake functions, including both pedal and lever-based directional control options.
Safety Features: The electrical diagrams show connections for a reverse alarm, brake lights, and various warning indicators on the instrument cluster, such as "Brake Res Level," "Coolant Level," "Oil Pressure," "Air Cleaner Restriction," "Service Engine," "HST Overspeed," "Glow Plug," "Water in Fuel," "XMSN Oil Temp," "XMSN 1st Gear," "HST Fault," "Alternator Charge," and "Seat Belt Light."

Usage Features:

Versatile Power Options: The availability of LPG, Gasoline, and Diesel engine types allows these forklifts to be used in various environments and applications, depending on fuel availability, emissions regulations, and operational preferences.
Comprehensive Instrumentation: The detailed instrument cluster provides the operator with critical information regarding engine status, fluid levels, temperatures, and operational warnings, contributing to safe and efficient operation.
Directional Control Options: The presence of both pedal and lever directional control options suggests adaptability to operator preferences and specific task requirements.
Lighting and Safety Alarms: Equipped with a full suite of lighting (work lights, turn signals, tail/brake/reverse lights) and a reverse alarm, these forklifts are designed for safe operation in diverse lighting conditions and busy work environments.

Maintenance Features:

Detailed Diagrams for Troubleshooting: The core of this manual consists of electrical, hydraulic, and transmission diagrams, which are essential for technicians to accurately diagnose and troubleshoot system malfunctions.
Safety Precautions: The manual explicitly outlines safety precautions, including disconnecting the battery, using correct lifting mechanisms, wearing safety glasses, using blocks to prevent rolling/falling, keeping the work area clean, using correct tools, and fastening "DO NOT OPERATE" tags. These guidelines are crucial for ensuring technician safety during maintenance and repair.
Approved Parts Requirement: The manual emphasizes the use of "HYSTER APPROVED parts" for repairs, ensuring that replacement components meet or exceed original equipment manufacturer specifications, which is vital for maintaining the forklift's performance, reliability, and safety.
Periodic Maintenance Reference: The safety precautions refer to "HOW TO PUT THE LIFT TRUCK ON BLOCKS" in the "Operating Manual or the Periodic Maintenance section," indicating that this manual complements other Hyster documentation for routine maintenance.
Warning and Caution Notes: The use of "WARNING" and "CAUTION" symbols throughout the instructions highlights potential hazards, guiding technicians to take necessary precautions to prevent injury or property damage.

Hyster E004 - Page 8

Related product manuals