Need help?Do you have a question about the Hyster G108 and is the answer not in the manual?
Essential safety steps and precautions for working on or near the forklift mast.
Instructions and warnings for safely removing forks from the forklift carriage.
Procedure for correctly installing forks onto the forklift carriage.
Guidelines for inspecting forks for wear, cracks, and alignment issues.
Step-by-step guide to removing the standard forklift carriage.
Procedure for installing the standard forklift carriage, including chain connections.
Steps to remove the integral sideshift carriage from the forklift.
How to clean and inspect carriage components, including bearings and bars.
Detailed instructions for replacing the cylinder rod seals on an integral sideshift carriage.
Procedures and safety warnings for removing the mast assembly from the forklift.
Steps to disconnect the mast's lower mounting points from the forklift drive axle.
Inspecting mast and mounting flanges for wear or damage after removal.
Specific instructions for disassembling two-stage LFL and FFL mast types.
To Next Page
General
