Need help?Do you have a question about the Hyster G160 and is the answer not in the manual?
General| Model | G160 |
|---|---|
| Type | Forklift |
| Load Capacity | 16000 lbs |
| Engine Type | Internal Combustion |
| Lift Height | Varies by configuration |
| Mast Type | Varies by configuration |
| Weight | Varies depending on configuration |
| Power Source | Internal Combustion |
| Engine Model | Varies by configuration |
| Tire Type | Pneumatic |
| Overall Length | Varies depending on configuration |
| Overall Width | Varies depending on configuration |
| Turning Radius | Varies depending on configuration |
Procedures for safe operation and inspection of the mast.
Steps for removing forks from the carriage.
Steps for installing forks onto the carriage.
Procedure for removing the standard carriage.
Procedure for removing the hang-on sideshift carriage.
Repair procedures for both standard and hang-on sideshift carriages.
Procedure for installing the standard carriage.
Procedure for installing the hang-on sideshift carriage.
Steps for removing the integral sideshift carriage.
Cleaning and inspection of the integral sideshift carriage.
Repair procedures for the integral sideshift carriage.
Steps for installing the integral sideshift carriage.
Procedure for removing the mast assembly.
Disassembly of two-stage mast types.
Procedures related to the three-stage FFL mast.
Procedures for safe operation and inspection of the mast.
Steps for removing forks from the carriage.
Procedure for removing the standard carriage.
Procedure for removing the hang-on sideshift carriage.
Repair procedures for both standard and hang-on sideshift carriages.
Procedure for installing the standard carriage.
Procedure for installing the hang-on sideshift carriage.
Steps for removing the integral sideshift carriage.
Procedure for removing the mast assembly.
Disassembly of two-stage LFL and FFL masts.
Procedures related to the three-stage FFL mast.
To Next Page
