Need help?Do you have a question about the Hyster S35XM and is the answer not in the manual?
Procedures for removing and installing the engine, referencing other manuals.
Instructions for inspecting and repairing cylinder head components.
Details on inspecting the cylinder head for distortion and wear.
Steps for inspecting the camshaft for cracks, wear, and straightness.
Instructions for measuring valve guide clearance and replacement procedures.
Procedures for inspecting valve stems, faces, and head thickness for wear.
Steps for installing the timing belt, tensioner, and covers, ensuring correct timing.
Instructions for inspecting main bearings for damage and measuring clearance, then installation.
Detailed steps for adjusting valve clearances for intake and exhaust valves when the engine is hot.
Procedure for measuring cylinder compression pressure and diagnosing low readings.
Specifies correct engine timing for different models and fuel types.
Diagnoses causes for engine not starting or running smoothly.
Troubleshoots engines lacking power or making unusual noises.
Troubleshoots causes and provides solutions for engines that are running too hot.
To Next Page
General
