Error! Use the Home tab to apply 标题
1,Part,Document Header,Part1,Document
Header1,Part2,Document
Header2,Part11,Document
Header11,Part12,Document
Header12,Part21,Document
Header21,Part111,Document
Header111,Part3,Document
Header3,Part13,Document Header13,Part22
Owner’s Manual
8
Cable tie several
Insulation tape several
4.1.3 Installation Steps
For Mobile Terminal
Step 1 Install the SIM card.
Caution: If a SIM card is required to realize the End-to-End Encryption (E2EE) feature which should
be purchased separately, please install the SIM card first. Otherwise, you can start from Step 2.
1. Loosen the four screws on the bottom chassis, and remove the cover.
2. Insert the SIM card properly into the holder.
Note:
Ensure that the waterproof ring is attached into the groove properly.
3. Return the cover and fasten the screws back on the chassis.
SIM Card Holder
SIM Card Holder
To Next Page
Loading...
