6
Powering On/Off
Basic Operations
Adjusting the Volume
Selecting a Zone
A zone is a group of channels exhibiting the same property, which is
programmed by your dealer and can facilitate convenient management
over the channel. The radio supports up to 3 zones, each with a
maximum of 16 channels. You can switch to the appropriate zone by
pressing the programmed Zone Up or Zone Down key preset by your
dealer.
Selecting a Channel
After the radio is powered on, you can rotate the Channel Selector knob
to select an appropriate channel. You can also switch to the designated
channel directly by pressing the programmed Preset Channel key preset
by your dealer.
If the Channel Notify feature is enabled by your dealer, the radio will play
the channel number upon channel switching.
Selecting a Zone Selecting a Channel
- +
To Next Page
Loading...
