16
can terminate such alerts by rotating a knob or pressing a key.
When the response period expires, your radio will trigger the
current emergency system automatically.
3. To disable the feature,
Press the programmed Lone Worker key (a low-pitched tone
sounds).
Note: If the Lone Worker feature is not disabled
before your radio is powered off, it will
remain enabled when powered on again.
Battery Power Indicator
This feature allows you to know the current battery strength.
Operation:
Hold down the programmed Battery Strength Indicator key, and
the radio will give a specific indication to represent the current
battery strength. Release the key to exit.
Indication Battery Strength
Green LED glows. High
Orange LED glows. Medium
Red LED glows. Low
Red LED glows and the low battery alert
sounds.
Insufcient
Busy Channel Lockout
If enabled via the programming software, this feature can prevent
your radio interfering with other transmitting radios on the same
channel. If you hold down the PTT key while the channel is in
use, your radio will keep beeping, alerting you to transmission
prohibition. To stop beeping, please release the PTT key. When
the channel is free, you can press and hold down the PTT key to
transmit.
Time-out Timer (TOT)
The purpose of TOT is to prevent any user from occupying a
channel for an extended period. If the preset time expires, the
radio will automatically terminate transmission and keep beeping.
To stop beeping, please release the PTT key. You must wait for
a certain time period (preset by your dealer) to initiate another
transmission.
If the pre-alert function is set by your dealer, your radio will alert
you to the TOT expiration in advance.
Note: This feature is null in Emergency mode.
Pseudo Trunking
This feature can be enabled via the programming software. If your
radio operates on a channel with this feature enabled and one time
slot is already occupied, it can transmit and receive on the other
free time slot, allowing you to communicate timely under emergent
situations.
MIC AGC
If enabled via the programming software, your radio will process
Functions and Operations
To Next Page
Loading...