Hytera TM-610 - Page 9

8
PC Mode
-----------
---------
---------
Connect PC with mobile radio via
programming cable and send
commands via PC.
1. User Mode
Turn the power to enter this mode, common use mode.
2. Panel Tuning Mode
The operations of Tuning Mode are described as following:
1) Press [P1] to power on the radio. The radio enters Tuning Mode.
2) Use [Up]/[Down] to select setting items. Press [P4] to enter the sub-item of the
selected item.
3) Press [P4] to enter the sub-item. Press [Up]/[Down] to adjust the parameter. Press [P4]
again to save data and move to next item; or press [P1] to return to previous menu
without saving data.
Setting items and display( ＊＊＊：1-256）
Setting item Main LCD
Wideband/
Narrowband Frequency Sub LCD Description
TX Power
TX HIGH
High power
Wideband
Certer _C *** No signalling
Low _L *** No signalling
High _H *** No signalling
TX LOW
Low frequency
Wideband
Center _C *** No signalling
Low _L *** No signalling
High _H *** No signalling
Max Deviation MAX.DEV
Wideband
Center _C *** No signalling
Low _L *** No signalling
High _H *** No signalling
Medium band Center M_C *** No signalling
Narrow band
Center N_C *** No signalling
Low N_L *** No signalling
High N_H *** No signalling
CDCSS Balance CDCSS.BAL
Wideband
Ceter _C *** 100Hz square wave
Low _L *** 100Hz square wave
High _H *** 100Hz square wave
Medium band Ceter M_C *** 100Hz square wave
Narrow band Ceter N_C *** 100Hz square wave