To Next PageTo Next Page
Need help?Do you have a question about the Hyundai Accent 2004 and is the answer not in the manual?
General| Displacement | 1.6 L |
|---|---|
| Torque | 106 lb-ft @ 3000 rpm |
| Fuel Type | Gasoline |
| Compression Ratio | 10.0:1 |
| Cylinders | 4 |
| Valves per Cylinder | 4 |
| Valve Configuration | DOHC |
| Fuel System | Multi-Point Fuel Injection |
| Horsepower | 104 hp |
Detailed specifications for the 1.6L 4-Cylinder Accent engine, covering general, valve timing, and cylinder head.
Procedure for checking engine oil level and condition using the dipstick.
Steps to identify coolant leaks in the system, including pressure testing.
Procedure for measuring engine cylinder compression using a gauge.
Steps to adjust the tension of the timing belt for proper engine operation.
Identifies timing belt system components and provides inspection guidelines.
Guidelines for checking and adjusting the tension of drive belts.
Procedure for adjusting the tension of the alternator belt.
Steps for removing the engine and transaxle assembly from the vehicle.
Identifies cylinder head components and outlines disassembly steps.
Procedures for inspecting valves, valve springs, and valve stem-to-guide clearance.
Detailed processes for replacing valve seat rings and valve guides.
Identifies camshaft system components and outlines disassembly steps.
Inspects camshaft journals, lobes, bearings, and HLA function.
Inspects timing chain and provides reassembly instructions.
Exploded view of crankshaft components and disassembly steps.
Inspects crankshaft journals, bearings, oil seals, and clearances.
Steps for installing crankshaft bearings and the crankshaft assembly.
Procedures for removing, inspecting, and reinstalling the flywheel.
Identifies piston, rings, pin, and rod components; inspects rings and rods.
Detailed process for separating and joining the piston and connecting rod via the piston pin.
Identifies oil pump components and outlines disassembly steps.
Inspects oil pump gears clearances and tests the oil pressure switch.
Instructions for installing the oil pump cover and related components.
Checks engine block for damage, warpage, and cylinder bore integrity.
Identifies engine mount components and outlines removal procedures.
Procedures for removing and reinstalling transmission mounts.
Identifies exhaust manifold components and outlines removal/installation.
Identifies intake manifold components and outlines removal/installation.
Procedures for removing the rear, center, and front exhaust mufflers.
Identifies air cleaner components and outlines inspection procedures.
Steps for installing the air cleaner assembly and its components.
