To Next PageTo Next Page
Need help?Do you have a question about the Hyundai Coupe 1999 and is the answer not in the manual?
General| Brand | Hyundai |
|---|---|
| Model | Coupe 1999 |
| Category | Automobile |
| Language | English |
Provides a detailed explanation of the SRS Air Bag system's purpose and components.
Details critical safety warnings and procedures to prevent injury during SRS servicing.
Tool for inspecting airbag harnesses and SRSCM with dummy terminals.
Used for deploying undeploy airbag modules safely and effectively.
Explains the SRSCM's role in deployment, malfunction detection, and system monitoring.
Highlights the importance of caution labels and instructions for their replacement if damaged.
Cautions for handling airbag modules, checking system status, and inspection intervals.
Specific warnings for ESPS unit, clock spring, and general SRS servicing procedures.
Identifies common causes for DTCs B1346/B1347, such as harness shorts or module issues.
Steps for diagnosing B1346/B1347 using resistance checks and harness checker.
Lists causes for DTCs B1348/B1349, including shorts to ground or battery.
Procedures to check continuity and voltage for shorts using the SRS harness checker.
Identifies causes for DTCs B1352/B1353, such as PAB harness open circuits or module malfunction.
Steps for checking continuity in PAB module circuits with the SRS harness checker.
Lists causes for DTCs B1354/B1355, like PAB harness shorts to ground or battery.
Procedures to check continuity or voltage for PAB shorts using the SRS harness checker.
Details SRSCM's monitoring of firing circuits, energy reserves, safing sensor, and accelerometer.
Specific DTC codes related to SRSCM internal malfunctions and crash recording.
Explains conditions for SRS Service Reminder Indicator (SRI) activation or deactivation.
Procedure for inspecting and replacing fuses related to the airbag system.
Steps to check the SRS Service Reminder Indicator circuit using a harness checker.
Instructions for connecting a scan tool to the DLC and performing SRS diagnosis.
Illustrates the installation layout for the SRS harness checker for troubleshooting.
Identifies causes for battery voltage DTCs, including harness, fuse, or charging system issues.
Procedures for measuring voltage and checking continuity for SRS power and ground connections.
Visual guide identifying major SRS components like the steering wheel and SRSCM.
Explains the structure and operation of driver and passenger airbag inflator modules.
Describes the SRS harness, its yellow wrapping, and the function of shorting bars.
Cautions for handling deployed airbags and by-product dust safely.
Lists tools and their use for deploying airbag modules remotely.
Defines disposal steps for abnormal modules or vehicles requiring scrapping.
Cautions regarding noise, smoke, and testing near sensors during deployment.
Steps for deploying airbags inside vehicles that are to be scrapped.
Warnings against disassembly, dropping, contamination, and resistance measurement.
Procedure for replacing a deployed Passenger Air Bag module.
Details the function of each pin in the SRSCM main connector for diagnosis.
Details pins for SRS SRI, driver, and passenger inflators on the SRSCM shorting bar connector.
