Driver assistance system
7-54
• If you want to drive below the speed
limit, set the Speed Limit Offset under
"0" or use the - switch on the steering
wheel to lower the set speed. If the
Speed Limit Offset is set over "0", the
set speed changes to a speed higher
than the limit for the road.
• If necessary, reduce your driving speed
as needed. Even after changing the set
speed according to the speed limit for
the road, your vehicle can still be driven
over the speed limit.
• If the speed limit for the road is under
20 mph (30 km/h), the set speed
changing function does not work.
• Intelligent Speed Limit Assist operates
using the speed unit set by you from the
settings menu. If the speed unit is set to
a unit other than the speed unit used in
your country, Intelligent Speed Limit
Assist may not operate properly.
• For more information on Manual Speed
Limit Assist operation, refer to the
"Manual Speed Limit Assist (MSLA)"
section in this chapter.
• For more information on Smart Cruise
Control operation, refer to the "Smart
Cruise Control (SCC)" section in this
chapter.
Intelligent Speed Limit Assist
malfunction and limitations
Intelligent Speed Limit Assist
malfunction
B0332EU01
When Intelligent Speed Limit Assist is not
working properly, the "Check Speed
Limit Assist System" warning message
may appear, and the ( ) warning light
may illuminate on the instrument cluster.
Have the vehicle inspected by an
authorized HYUNDAI dealer.
Hyundai_CN7_PE_en_US_2024.book Page 54
To Next Page
Loading...
Need help?
General
