Removing and storing the
spare tire
Unscrew the hold-down wing bolt in
a counterclockwise direction to
remove the tire.
Screw it in the clockwise direction to
store the spare tire.
To prevent the spare tire and tools
from “rattling” inside while driving,
properly store them.
When it is too tight to loosen the
hold-down wing bolt by hand, you
can easily loosen it, using the Jack
handle.
1.Put the Jack handle (1) in the hold-
down wing bolt.
2.Unscrew the hold-down wing bolt
in a counterclockwise direction
with the Jack handle, utilizing the
principles of the lever and fulcrum.
When you remove or store the
spare tire, do not touch or hit the
battery with the spare tire.
Touching or hitting of the battery
may cause failure of electrical cir-
cuits.
Changing tires
1.Park the vehicle on a level surface,
and firmly set the parking brake.
2.Set the shift lever in P(Park).
3.Press ON the hazard warning
flasher.
4.Take out the wheel lug nut wrench,
jack, jack handle, and spare tire
from the vehicle.
NOTICE
6-13
What to do in an emergency
06
OVI065005N
OVI065033N
OVI065001N
OVI065007N
To Next Page
Loading...
Need help?
General
