www.hyundaipowerproducts.co.uk 01646 687 880
aftersales@hyundaipowerproducts.co.uk
Operation
22
Overload Protection
This machine is equipped with an overload protection system. To protect the motor from being
damaged, the safety switch will automatically switch off the power when the motor is
overloaded. Wait at least 1 minute before restarting by first pressing the reset button and then the
ON / OFF switch.
If the motor does not restart, do the following :
1
Press the safety switch (C).
2
Press the Forward/Reverse Button (A) to REVERSE position.
3
Press and hold the On/Off switch to ON (I) position to remove any objects that could obstruct
the blades.
A B
C
To Next Page
Loading...