Why Hyundai Paper Shredder motor does not run?
If your Hyundai Paper Shredder's motor isn't running, first, ensure the safety switch is functioning correctly. Next, check the power supply cable, the plug, and the house fuse to rule out a power failure.
What to do if Hyundai HYCH2800ES Paper Shredder material is not drawn in?
If the material isn't being drawn into your Hyundai Paper Shredder, it might be jammed. Turn the shredder OFF, remove the jammed material, then turn it back ON. Re-feed thick branches, ensuring the blade doesn't immediately engage the pre-cut notches. Alternatively, if the shredding material is too soft, try inserting wood or dried branches. If it still does not start, press the reset button and then the ON / OFF switch. If it still does not start, take the steps indicated in the ‘Overload Protection’ section.
General| Cut Type | Cross-Cut |
|---|---|
| Security Level | P-4 |
| Auto Start/Stop | Yes |
| Overload Protection | Yes |
| Overheat Protection | Yes |
| Bin Capacity | 16 L |
| Cool Down Time | 40 Minutes |
| Shred Size | 4 x 35 mm |
Read and understand instructions carefully before operating the machine. Ensure familiarity with controls and proper operation.
Guidelines for personal safety, including PPE, keeping distance from moving parts, and situational awareness.
Safe operating procedures, avoiding confined spaces, keeping clear of moving parts, and emergency actions.
Procedures for handling foreign objects, machine jamming, power failures, and specific material feeding guidelines.
Safe operation practices, material handling, and precautions for battery safety.
Guidelines for safe electrical connections, cable handling, and use of RCDs to prevent shock hazards.
Guidance on how to feed materials into the shredder, avoid jamming, and general operating tips for efficient use.
Step-by-step procedure for safely starting the shredder motor using the ON/OFF and forward/reverse switches.
Procedure for safely stopping the shredder motor by pressing the ON/OFF switch.
Common problems, their possible causes, and solutions for issues like motor not running or material jamming.
To Next Page