EasyManua.ls Logo

Hyundai HYCH2800ES - Continued Safe Operation Practices

Hyundai HYCH2800ES
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.hyundaipowerproducts.co.uk 01646 687 880
aftersales@hyundaipowerproducts.co.uk
Safety Information
9
Switch off the device immediately and wait until all moving parts have come to a standstill in the
event of a foreign object being struck or if the device begins to make unusual noises or vibrate.
Disconnect the machine from the power source and take the following steps before restarting
and operating the machine:
• Check for damage;
• Replace or repair damaged parts;
• Check for loose parts and tighten them.
• Before starting the machine, make sure that the feeder is empty.
• Warning! This power tool generates an electromagnetic field during operation. Under certain
circumstances, this field may affect active or passive medical implants. To reduce the risk of
serious or fatal injury, we recommend that individuals with medical implants consult your
physician and the manufacturer of the medical implant before operating the machine.
• Only feed materials to be shredded after the machine is switched on. Do not feed materials to
be shredded after the machine is switched off.
• The machine is equipped with a safety switch to prevent it from being switched on again
accidentally after a power failure.
• Do not tilt the machine whilst it is running.
• Always stand clear of the discharge zone when operating this machine.
• When feeding material into the machine be extremely careful that pieces of metal, rocks,
bottles,cans or other foreign objects are not included.
• If the machine becomes clogged, shut off the power source and disconnect from power supply
before clearing debris. Keep the power source clear of debris and other accumulations to prevent
damage to the power source or possible fire.
• Do not transport the machine whilst connected to a live power source.
• Do not fill soft waster such as kitchen rubbish into the shredder.
• Only insert as much material so that the in-feed chute will not be blocked up.
• WARNING! Long material extending out from the machine could lash out when being drawn in
by the blades. Please keep at a safe distance.
• Ensure the shredded material can fall freely from the discharge chute.
• To make finer compost, the shredded material can be shredded for a second time.
During Use (Continued)
!