1
CONTROLS AND EQUIPMENT
23
There will be an audible "click" when the
tab locks in the buckle. The seat belt
automatically adjusts to the proper length
only after the lap belt is adjusted manu-
ally so that it fits snugly around your
hips. If you lean forward in a slow, easy
motion, the belt will extend and let you
move around. If there is a sudden stop
or impact, the belt will lock into position.
It will also lock if you try to lean forward
too quickly.
B220A02Y-D
!
!
WARNING:
o When using the rear seat centre
belt, you must lock all metal tabs
and buckles. If any metal tab or
buckle is not locked, it will in-
crease the chance of injury in the
event of collision.
o Never unlock the metal tab (a) and
the buckle (b) with the following
exceptions.
(1) In case of folding rear seatbacks
down.
(2) If transporting an object on the
rear seat may cause damage to
the rear seat centre belt.
o Lock the metal tab (a) and the
buckle (b) immediately after fold-
ing rear seatbacks up.
B220C01A-EAT
To Release the Seat Belt
When you want to release the seat belt,
press the button in the locking buckle.
WARNING:
The centre lap belt latching mecha-
nism is different from those for the
rear seat shoulder belts. When fas-
tening the rear seat shoulder belts or
the centre lap belt, make sure they
are inserted into the correct buckles
to obtain maximum protection from
the seat belt system and assure proper
operation.
B220C02FC
fcuk-1.p65 12/27/2006, 10:11 AM23
To Next Page
Loading...
Need help?
General
