Hyundai Robex 130 SMART User Manual

Identifies the placement of various warning and safety labels on the machine.

Explains the meaning and purpose of specific safety labels on the machine.

Explains directional indicators used in the manual relative to the operator's perspective.

Details the location of machine and engine serial numbers for identification.

Defines important safety and informational symbols used throughout the manual.

Outlines essential checks and precautions before starting machine operation.

Provides guidance on safe operation practices and potential hazards.

Details safety precautions to be followed during machine maintenance procedures.

Describes the correct procedure for safely parking the machine.

Identifies and illustrates the main parts of the excavator.

Lists detailed technical specifications of the machine.

Provides diagrams and data on the machine's operational reach and depth.

Details the weight of various assemblies and the total machine.

Presents load capacity charts based on reach and height.

Guides users on choosing the appropriate bucket based on capacity and material.

Describes the track system, shoes, and selection methods.

Provides detailed specifications for the engine and main hydraulic components.

Lists appropriate lubricants and oils for various service points and temperatures.

Overview of the operator's cabin layout and features.

Explains the monitor panel, gauges, and warning lamps.

Details the function and operation of various switches in the cabin.

Describes the function of control levers and travel pedals.

Covers miscellaneous items like 12V socket, cigar lighter, and fuse box.

Guidance for the initial 100 hours of machine operation for performance.

Lists pre-start checks to ensure safe and proper operation.

Step-by-step instructions for starting and stopping the engine.

Explains the CAPO system for selecting power and work modes.

Details how to operate the arm, swing, boom, and bucket.

Instructions for machine travel, including on slopes and soft ground.

Provides tips for optimizing digging and lifting operations.

Guidelines for operating in cold, sandy, dusty, or rocky environments.

Describes sounds and phenomena that may occur during normal operation.

Procedures for storing the machine to prevent deterioration.

Illustrates different hydraulic control lever patterns.

Explains how to switch between single and double action hydraulic circuits.

Outlines steps for preparing the machine for transport, including road rules.

Provides dimensions and weight details for base machine and attachments.

Step-by-step guide for loading the machine onto a trailer.

Details how to secure the machine on the trailer for transport.

Instructions for safely lifting and placing the machine using a crane.

General guidance and precautions for performing maintenance.

Important safety warnings and best practices before starting maintenance.

Guidelines for replacing parts, using genuine items, and general maintenance steps.

Explains how to safely release hydraulic system pressure before repair.

Safety advice for installing hydraulic hoses and pipes.

Lists safety-critical parts and their recommended replacement intervals.

Provides torque specifications for various bolts and fittings.

Specifies lubricants and coolants for new machines.

Detailed chart of recommended oils based on ambient temperature.

Lists daily, 50-hour, and initial 50-hour maintenance tasks.

A summary table of maintenance intervals and service points.

Detailed procedures for checking and replacing engine oil and filters.

Covers wiring, battery checks, and troubleshooting electrical issues.

Common engine troubles and their possible causes and services.

Troubleshooting guide for electrical system problems and symptoms.

Troubleshooting for other issues like track slip, slow operation, and noise.

Guidance on choosing the right hydraulic breaker for the machine.

Details on setting up hydraulic circuits for breaker attachments.

Maintenance schedule for hydraulic oil and filters when using a breaker.

Safety warnings and incorrect operating methods for breaker use.

Instructions for fixing and removing buckets using the quick clamp system.