Hyundai Rolex 360LC-7A User Manual

Standard Equipment
ISO standard cabin
ᴌHeater & Defroster
ᴌHeater (7,500 kcal/hr, 30,000 BTU/hr)
ᴌAll-weather steel cab with all-around visibility
ᴌSafety glass windows
ᴌRise-up type windshield wiper
ᴌSliding fold-in front window
ᴌSliding side window
ᴌLockable door
ᴌHot & cool box
ᴌAccessory box & Ash-tray
Computer Aided Power
Optimization(New CAPO) system
ᴌ2-power mode, 3-work mode, 2-user mode
ᴌAuto deceleration & one touch deceleration
system
ᴌAuto warm up system
ᴌAuto overheat prevention system
Heater & Defroster (7500 Kcal/hr, 30000 BTU/hr)
Self diagnostic system
AM/FM radio and cassette
ᴌRadio remote switch
Centralized monitoring
ᴌLCD display
Engine speed
Clock & Error code
ᴌGauges
Fuel level gauge
Engine coolant temperature gauge
Hyd. oil temperature gauge
ᴌWarning
Fuel level
Check Engine & CPU
Engine oil pressure
Engine coolant temperature
Hyd. oil temperature
Low battery
Air cleaner clogging
ᴌIndicator
Power max.
Preheat & Engine warming-up
One touch decel
Starting Aid (Air gride heater) cold Weather
Door and cab locks, one key
Two outside rearview mirrors
Fully adjustable suspension seat with seat belt
Slidable joystic, pilot-operated
Console box tilting system(LH.)
Three front working lights
Electric horn
Batteries (2 x 12 V x 160 AH)
Battery master switch
Removable clean out screen for Hyd. oil cooler
Automatic swing brake
Removable reservoir tank
Water saparator & Fuel pre-filter, Fuel line
Boom holding system
Arm holding system
Counterweight (6500 kg, 14330 lb)
Mono boom (6.5 m, 21’ 4”)
Arm (3.2 m, 10’ 6”)
Track shoes (600 mm, 23.6”)
Track rail guard
Travel alarm
Fuel warmer
Optional Equipment
Air-conditioner(5,000 kcal/hr, 20,000 BTU/hr)
FATC (Full Automatic Temperature Control)
Sun visor for cabin inside
Fuel filler pump(35ὀ/min, 9.2 USgpm)
Beacon lamp
Safety lock valve for boom cylinder with
overload warning device
Safety lock valve for arm cylinder
Single acting piping kit( breaker, etc)
Double acting piping kit(cramshell, etc)
Accumulator, work equipment lowerling
12 volt power supply(24V DC - 12V DC converter)
Electric transducer
CD Player
Various optional Arms
ᴌShort arm (2.50 m, 8’ 2”)
ᴌLong arm (3.90 m, 12’ 10”)
ᴌLong arm (4.30 m, 14’ 1”)
ᴌSuper long arm (5.10 m, 16’ 9”)
Various optional Buckets(SAE heaped)
ᴌStandard bucket (1.62 m
3
, 2.12 yd
3
)
ᴌNarrow bucket (1.15 m
3
, 1.5 yd
3
)
ᴌNarrow bucket (1.46 m
3
, 1.91 yd
3
)
ᴌLight duty bucket(1.86 m
3
, 2.43 yd
3
)
ᴌLight duty bucket(2.10 m
3
, 2.75 yd
3
)
ᴌLight duty bucket(2.32 m
3
, 3.03 yd
3
)
ᴌHeavy duty bucket(1.62 m
3
, 2.12 yd
3
)
ᴌRock bucket (1.44 m
3
, 1.88yd
3
)
ᴌRock bucket (1.62 m
3
, 2.12 yd
3
)
ᴌRock bucket (1.86 m
3
, 2.43 yd
3
)
Cabin lights
Cabin FOPS/FOG (ISO 10262)
Cabin Roof-Cover Transparent
Track shoes
ᴌTriple grousers shoe (700mm, 28”)
ᴌTriple grousers shoe (750mm, 30”)
ᴌTriple grousers shoe (800mm, 32”)
ᴌTriple grousers shoe (900mm, 36”)
Tropical kit
ᴌFan drive ratio (1.1:1)
ᴌLouver side cover (R/H)
Lower frame under cover
Full track guard
Preheating system
Tool kit
Operator suit
Mechanical suspension seat with heated
ᴌAdjustable air suspension seat
PLEASE CONTACT
www.hyundai-ce.com 2006. 09 Rev 0
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.
All US measurment rounded off to nearest pounds or inches.
ROBEX 360LC-7A
Applied Tier III Engine
ᵉ
Photo may include optional equipment
CRAWLER EXCAVATOR
www.hyundai-ce.com
CUMMINS QSL Engine : 296 HP(221 kW) / 1,850 rpm
Operating Weight : 36,100 ~ 37,400 kg (79,590 ~ 82,500 lb)
Bucket Capacity, SAE : 1.15 ~ 2.32 m
3
(1.5 ~ 3.03 yd
3
)
NEW 7A SERIES

Hyundai Rolex 360LC-7A Specifications

General

Brand	Hyundai
Model	Rolex 360LC-7A
Category	Excavators
Language	English

Summary

Standard Equipment and Features

ISO Standard Cabin and Comfort Features

Details the ISO standard cabin, including heating, visibility, safety glass, sliding windows, and operator comfort elements.

Advanced Control Systems and Monitoring

Highlights the CAPO system, self-diagnostics, engine monitoring, and various operating modes for optimized performance.

Structural and Mechanical Standard Features

Lists standard structural components like counterweight, boom, arm, track shoes, and protective covers for durability.

Optional Equipment and Configurations

Cabin and Operator Comfort Options

Describes optional features for enhanced operator comfort, such as air conditioning, sun visor, and audio systems.

Performance and Work Tool Options

Details optional equipment for performance enhancement and work versatility, including arms, buckets, and track shoes.

Technology in Cab Design

Enhanced Visibility

Focuses on improved visibility through large windows and effective ventilation for safer and more efficient operation.

Optimized Operator Environment

Details the ergonomic design, adjustable controls, and comfortable seating for reduced operator fatigue.

Low Noise Design

Highlights features that minimize noise levels, such as improved door seals and sound-damping insulation.

Operating Environment and Protection

Intelligent Display and Vibration Control

Covers the improved intelligent display system and cab mounting for shock and vibration minimization.

Ergonomic Cab Features

Details the roomy interior, comfortable operating space, smooth travel pedals, and intuitive joystick controls.

Cab Safety and Convenience

Includes features like rear emergency exit window, improved wiper, and cabin lights for operator safety and convenience.

Advanced Hydraulic System

Automatic Engine Control Systems

Explains automatic engine overheat prevention, anti-restart system, and automatic warming-up system.

Power Boost and Flow Control

Details the power boost system for increased digging power and various flow control systems for precise operation.

Self-Diagnosis and Operation Modes

Covers the self-diagnosis system with error codes and the CAPO system's mode selections for optimized performance.

Increased Performance and Durability

Cummins QSL Engine

Highlights the features of the Cummins QSL engine, including its power, reliability, fuel efficiency, and emissions compliance.

Reinforced Bucket and Undercarriage

Describes the heavy-duty construction of the bucket linkage and the strong, stable undercarriage for tough conditions.

Precise Swing and Travel Control

Details features for powerful and precise swing control and improved travel controllability with shock reduction.

Reliability and Serviceability

Easy Access for Servicing

Explains the full open doors and master key system providing easy access to components for maintenance and repair.

Accessible Engine Components

Details the design for easy maintenance of engine components, cooling, and hydraulic systems.

Centralized Electric Control and Pump

Highlights the centralized electric control box, easy air cleaner assembly, and highly efficient hydraulic pump.

Specifications and Capacities

Engine and Hydraulic System Specifications

Provides detailed specifications for the engine, hydraulic system, swing system, and coolant/lubricant capacities.

Undercarriage and Drivetrain Details

Lists specifications for the undercarriage, drive method, brakes, and gradeability, including track shoe details.

Operating Weights and Digging Forces

Presents approximate operating weights, counterweight, and various digging force specifications (SAE and ISO).

Dimensions and Work Ranges

Machine Dimensions

Details key dimensions such as boom length, arm length, overall height, and transport dimensions.

Work Ranges and Digging Envelope

Illustrates and lists the maximum digging depth, reach, height, and swing radius for different boom and arm configurations.

Lifting Capacities

Lifting Capacities with Standard Arm

Presents lifting capacities for various load points with a standard arm and different track shoe configurations.

Lifting Capacities with Long Arms

Shows lifting capacities for different load points using longer arm configurations for extended reach.

Lifting Capacities with Heavy-Duty Buckets

Details lifting capacities when equipped with heavy-duty buckets, considering different boom and arm lengths.