EasyManua.ls Logo

Hyundai RT 910 RIP - Troubleshooting Guide

Hyundai RT 910 RIP
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 24
5. DELETE
This delete function is only apply to the track that it is currently under playback. When de-
leting, the LED indicator of RECORD/ERASE will be flash twice; Once deleted the current
track, it will automatically into play mode
LINE-OUT JACK OPERATION
1. Connect the RCA Line-out Jack (24/55) into the external amplifier to play the music from
outside source.
LINE IN OPERATION
1. Power on the unit by turning the volume control knob clockwise. Turn the FUNCTION
SWITCH (2) to PH/AUX mode. Conect the music source you want to play with Line-in jack
(23), then you can use the unit to play the connect music source.
ACCESSORY: ADAPTER FOR 45 RPM
To play a 45 rpm record, place the supplied adaptor (9) on the SPINDLE (7)
TROUBLESHOOTING GUIDE
The unit will not operate.
Check that the unit is properly connected to an A/C power outlet.
No sound is coming from the unit
Check that the ON/OFF VOLUME KNOB (4) and see the volume level..
The white protective needle cover has not been removed from the tone arm.
The tone arm will not move
Remove black tie wrap from the tone arm.
The tone arm hold down clip has not been released.
No Radio
The FUNCTION SWITCH (2) has not been moved from the PH/AUX position.
Adjust the ON/OFF VOLUME KNOB (4) and see the volume level.
Rotate the TUNING KNOB (3) to nd the desired radio station.

Related product manuals