EN - 32
● Remove the opaque white plastic stylus cover from the phonograph stylus by sliding it in
the direction of the arrow.
● Discard the stylus cover.
● Release the tone arm lock lever.
● Connect the plug to your AC outlet.
POWER SOURCE
This product is designed to operate on normal 220V 50Hz AC only. Attempting to operate this sys-
tem from any other power source may cause damage to the system, and such damage is not
covered by your warranty.
NOTE: You will note that this system is equipped with
a polarized AC power plug having one blade wider than
the other. This is a safety feature. If this plug does not
t into your existing AC outlet, do not try to defeat this
safety feature by ling the wide blade to make it t into
your outlet. If this plug will not t into your outlet, you
probably have an outdated non-polarized AC outlet.
You should have your outlet changed by a qualied
licensed electrician.
To Next Page
