FEATURES OF YOUR HYUNDAI
1- 68
NOTE:
o It should be noted that prolonged opera-
tion of the heating system in " " mode
will give rise to fogging of the windshield
and side windows and the air within the
passenger compartment will become stale.
In addition prolonged use of the air condi-
tioning with the " " mode selected may
result in the air within the passenger com-
partment becoming excessively dry.
o When the ignition switch is turned "ON",
the air intake control will change to " "
mode (regardless of switch position). This
is normal operation.
Face-Level
Selecting the "Face" mode will cause air to be
discharged through the face level vents.
Bi-Level
Air is discharged through the face vents and the
floor vents. This makes it possible to have cooler
air from the dashboard vents and warmer air from
the floor outlets at the same time.
B670D01L-AAT
Air Flow Control
This is used to direct the flow of air. Air can be
directed to the floor, dashboard outlets, or wind-
shield. Five symbols are used to represent Face,
Bi-Level, Floor, Floor-Defrost and Defrost air
position.
B670D01HP
HHP283
HHP283-1
To Next Page
Loading...
Need help?
General
