i-box Daybreak User Manual

15 | Daybreak
USB charging ports
1. You can charge two external devices by connecting them to the USB charging
ports (13 & 14) on the back of the your Daybreak.
2. Your devices battery charge status will usually be shown on it’s display.
• There may be some radio interference while charging.
• Please charge devices using one charging method at a time (wireless or USB).
• Please do not try to charge the same device using the wireless charging function
and one of the USB charging ports (13 or 14) at the same time.
Backup batteries
Please Note: These batteries are for backup only and will not power your Daybreak
just save the time, date and alarm settings when mains power is cut or disconnected.
The Daybreak has a backup battery feature. Please insert 2x AAA batteries (not
supplied) into the battery compartment on the underside of your Daybreak (see
page 6). This will ensure that time and alarm settings are remembered if the
Daybreak is unplugged or there is a power cut.
Specifications
Power Adapter Input: 100-240V~50/60Hz
Power Adapter Output: 9V𝌂3.5A, 31.5W
Wireless Charging: 10W
USB Outputs: 2x 5V𝌂2.1A
Speaker Output 2x 5W
FM Frequency Range: 87.5 - 108MHz
FM Presets: x10
Backup Battery Requirement: 2x AAA 1.5V

i-box Daybreak Specifications

General

Brand	i-box
Model	Daybreak
Category	Clock Radio
Language	English