EasyManua.ls Logo

I-Trac A1 User Manual

I-Trac A1
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
A1 GPS Tracker
(Vehicle/Motorcycle)
Version:08
Question and Answer IconNeed help?

Do you have a question about the I-Trac A1 and is the answer not in the manual?

I-Trac A1 Specifications

General IconGeneral
ConnectivityGSM/GPRS
Water ResistanceIP67
DisplayOLED
Resolution128 x 64 pixels
GPS ChipsetMTK3333
Channels22
BatteryLithium-ion rechargeable
Memory4MB
WaterproofYes
Dimensions3.9" x 1.6" x 0.9" (99mm x 41mm x 23mm)

Summary

Disclaimer

Specification

Install SIM Cards

Led light description

Blue LED Light--- GPS Status

Describes the meaning of the blue LED's flashing or steady states for GPS signal.

Yellow LED Light--- GSM Status

Explains the yellow LED's states for GSM signal and SIM card status.

Important Notice

Locate by Phone call

Locate by SMS command

Request location with coordinates

Command to request the tracker's current position with coordinates.

Request location with Google map URL link

Command to get a Google Maps link for the tracker's location.

Locate by 900D web based tracking software

Set Access Point Name (APN)

Configure the device's APN settings for internet connectivity.

Register on Web Platform

Steps for registering the GPS tracker on the web tracking platform.

Add Vehicle in Software

Instructions for adding the tracker as an asset in the tracking software.

SMS command list

Set Controller phone number

How to set up authorized phone numbers for controlling the device.

Delete Controller phone number

Commands to remove pre-saved controller phone numbers.

Work Mode Exchange

Command to switch between SMS and GPRS operating modes.

Change user password

Procedure for changing the device's user password.

Time Zone Setting

Command to set the device's time zone.

Command Get Daily report

How to request a daily activity report from the device.

Geo-Fence Configuration

Commands for setting up and managing geo-fencing features.

Alert while power off

How to enable/disable alerts when the device power is turned off.

Over speed Alarm

Command to set the speed limit for over-speed alerts.

Set Defence Alarm ON/OFF

Commands to enable or disable defense alarms.

Sleep Mode Control

How to put the device into or take it out of power-saving sleep mode.

Set Access Point Name (APN)

Command to configure APN parameters for GPRS connection.

Set server IP address and Port

Command to set the server IP and port for data transmission.

Set Data upload interval time

Command to adjust how frequently the device sends data.

Troubleshooting

Tracker Not Online on App

Solutions for when the GPS tracker cannot connect to the iTracksafe app.

Tracker Shows "Unactive"

Troubleshooting steps for the tracker appearing inactive on the web platform.

GPS Tracker LED Light Off

What to do if the GPS tracker's LED indicator is not lighting up.

"Log in Fail" Error on App

Resolving "log in fail" errors when using the iTracksafe mobile app.

Tracker Offline After Configuration

Steps to take if the tracker remains offline after setting IP, Port, and APN.

Related product manuals