EasyManua.ls Logo

I-Trac MT-1C - Important Notices; Default Password and Key Alerts; Detail Operation; Controller Phone Number Setup

I-Trac MT-1C
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Status
Meaning
Flash
No gps signal, or searching for gps signal
Always on
GPS Signal ok
Orange LED Light---GSM Status
Status
Meaning
Flash
No sim card, or searching for gsm signal
Always on
GSM Signal ok
Red LED Light--- Work status
Status
Meaning
Flash
Working
Not on
Power off or sleep
4. Important Notice:
1. This tracker have two work mode which is SMS and GPRS Mode. SMS mode is for off line
tracking by Mobile phone. GPRS Mode is for on line tracking by computer and mobile phone .
2. Default password 0000
4. Main power off alarm: Device will send alert sms to the 3 controller phone number, and call
the first controller number
Geo-fence alarm: Device will send alert sms and call the first controller number.
Over speed alarm: Device will send alert sms and call the 3 controller phone numbers.
Shock alarm: Device will send alert sms to the first controller phone number.
Low battery alert: Device will send alert sms to the first controller phone number.
ACC alarm: Device will send alert sms to the 3 controller phone number, and call the first
controller number.
5. Detail Operation
1. Controller phone number
Command: controller phone number+ user password +space+Sequence number (1-3)
Eg: 158111122220000 1
Reply : SET USER NUMBER 1 OK.
Eg: 168111122220000 2
Reply : SET USER NUMBER 2 OK
Eg: 178111122220000 3
Reply : SET USER NUMBER 3 OK
Note: 1. Tracker can have three pre-saved number
2. New Number can cover the old number
3. No pre-saved number also can control the tracker, but alarm information only to pre-saved
number

Related product manuals